Cathodic electrophoretic paint of HLG-800 acrylic emulsion,It is an emulsion electrophoretic paint formulated by special process modification of acrylic monomers. Its super strong weather resistance, corrosion resistance, high hardness greater than 4H, and easy maintenance can be widely used in the protection of decorative electroplating coatings and metal surfaces. Anti corrosion applications for light industry products such as aluminum profiles, locks, lighting fixtures, jewelry, household appliances, automotive and motorcycle accessories, sanitary ware, lighters, luggage handles, hardware tools, etc.
Paint Quality Index
项目 Program | HLG-800 | 检验条件 Test Conditions |
外观 Appearance | 半透明乳白色液体Translucent milky white liquid | 目测 Visual |
原漆固体份 % Original Solids % | 30±3 | GB/T 1725 |
Painting Process Parameter
项目Program | 参数范围 Parameter Range | 试验条件 Test Conditions | ||
Diluent 稀释液 | 固体份 Solids | 120℃/1h/2g,% | 10±3 | GB/T 1725 |
PH 值 | 25℃ | 3.8-4.5 | 酸度计 | |
电导率 Conductivity | 25℃,us/cm | 400-600 | 电导率仪 | |
浴温 Bath Temperature | ℃ | 30±2 | 温度计 | |
涂装时间 Painting Time | s | 50-200 | -- | |
涂装电压 Painting Voltage | V | 30-200 | ||
漆膜固化条件 | ℃/min | 烘烤温度范围:150-220℃ 标准烘烤条件:160℃x30min (被涂物温度) Baking Temperature Range:150-220℃ Standard Baking Condition:160℃x30min (Temperature of Painted Object) | 工件实温 | |
Film Cure Conditions | ||||
Film Performance Index
项目Program | 标准 Standard | 测定条件 Determination Condition | |
硬度Hardness | -- | ≥4H | GB/T6739 |
附着力Adhesion | 级 | 0 | GB/T9286 |
冲击Impact | Kg,cm | 50 | GB/T1732 |
耐盐雾Salt Spray Resistance | h | ≥300 | GB/T 1771 |
* Note: The substrate use the Bonder standard phosphating steel panel, crossed out unidirectional expansion eclipse ≤2mm. Bonder
Package and Storage
1. This product is a water-borne industrial coatings, non-hazardous, non-inflammable and non-explosive products; transportation to prevent direct sunlight, avoid freezing (>5℃ ); Packaging for 25/200L plastic barrel.
2. The storage temperature should be controlled at 5~35℃.
3. The effective storage life is 6 months. If it exceeds 6 months, it can also be used when passing inspections.
4. The above parameters are for reference only. The supplier has the right to continuously improve according to customer needs, and the specific delivery shall prevail.